Operation Manual

CP590 Page 17
4. Choose the desired Port number and press [ENT].
5. Press [CLR] until the Chart page is shown.
Send or Receive RTE and WPL
1. Press [MENU], move the ShuttlePoint knob to highlight USER POINTS and press [ENT].
2. Move the ShuttlePoint knob to highlight
MARKS/WPTS and press [ENT].
3. Move the ShuttlePoint knob to highlight
SEND or RECEIVE to send or receive points
to or from an external device (PC) capable of listening to NMEA WPL and RTE
sentences and press [ENT]. After the messages are sent or received a popup window
will be shown.
2.4.2 ACC2 Connector
This cable allows connections to a VHF, NMEA device with NMEA Output or the Input of
the optional Radar Antenna.
BLACK
RED
GREEN
BLUE
BROWN
GRAY
WHITE
YELLOW
PIN WIRE COLOR FUNCTION
No Connection
No Connection
NMEA Common
Port4 Input
Port4 Output
Port5 Input
Port5 Output
No Connection
1
2
3
4
5
6
7
8
*
*
CONNECTION EXAMPLE
Common (ground) for NMEA devices**
Connect to Output of NMEA device
Connect to Input of NMEA device . Default is NMEA-0183 with GLL, RMB, RMC and XTE sentences
Connect to Output of NMEA device
Connect to Input of NMEA device . Default is NMEA-0183 with GLL, RMB, RMC and XTE sentences
**
**
**
**
*NOTE: RADAR Antenna connection (optional)
For Radar Installation instructions visit www.standardhorizon.com and click on Owner’s Manuals
and click to download files called Radar Installation Manual and Radar Operation Manual.
**NOTE
RS232 not opto-isolated electrical interface.