Operation Manual

CP590 Page 113
PROTECTIVE COVER SHAPE
UNIT SHAPE
16.14” [410mm]
10.9” [278mm]
12.4” [315mm]
R15 - 4 POS.
CUTTING LINE
7.87” [200mm]
8.2” [208mm]
8.9” [227mm]
0.17” [O4,5mm] - MOUNTING HOLES
4 POS.
Figure 19a - CP590 Flush Mount cutout (Dimensions are in mm)
19.0 OPTIONAL FF525 FISH FINDER SPECIFICATIONS
Power Output : 600W or 1kW depending on connected transducer
Frequency : 50 and 200kHz
Minimum Depth : 5ft at 50kHz, 2.5ft at 200kHz
Maximum Depth : 1500ft at 50kHz, 700ft at 200kHz
Airmar X-DUCER ID : Must use STANDARD HORIZON transducers
Advanced Digital Signal Processing
Speed & Temperature Sensor (if available on transducer)
Alarms (Shallow Water, Depth, Fish, Temperature)
Trip Log, Fish Symbols
STC, Interference Rejection, Automatic noise reduction
A-Scope, White Line, Zoom x2/x4
Auto range/gain/frequency/shift/ping rate
16/256 colors display user selectable
19.1 OPTIONAL WAAS GPS RECEIVER SPECIFICATIONS
This optional WAAS GPS Receiver is based on a ultimate GPS engine that delivers
accuracy better than three meters by decoding the GPS correction signals from the satellite-
based WAAS (Wide Area Augmentation System). The GPS engine, interface electronics
and the passive antenna are enclosed inside the waterproof plastic housing. This provides
advanced state of the art GPS performance in an easy to use package.