Operation Manual

Page 12 CP590
2. GETTING STARTED
Through this manual you will see highlighted words. Please refer to the legend below:
[MENU] If you see brackets around a bold and capital letter word this refers to a key press.
[CHART] If you see brackets around a bold and small capital letter word this refers to a Soft Key
press.
GENERAL SETUP When a word(s) is bold capital letters and underlined, this refers to a menu selection
item.
2.0 MOUNTING THE CP590
The CP590 is supplied with hardware for bracket or flush mounting. Below are pictures
showing actual examples of the two types of installation.
BRACKET Mount
FLUSH Mount
2.1 BRACKET MOUNTING
Before installing ensure the area the bracket is mounted to is strong enough to support the
weight of the CP590 especially while under way. After the location is found, attach the
mounting base to the area using the supplied hardware.
2.2 FLUSH MOUNTING
The CP590 is supplied with a flush mount template for the cutout hole and screw holes
required to install the GPS Chart Plotter.
NOTE
Before drilling holes make sure there is enough room to mount the CP590 and there are no
obstructions.