Operation Manual

CP390i and CPF390i Page 99
0-1000 Ft
50-100 Ft
Figure 12.0.8 - Depth Settings
12.0.9 Land Settings
To control the display on the map of the terrestrial features.
Land Elevations : Turns the Land Elevations On or Off.
Land Elevation Values : Turns the Land Elevation Values On or Off.
Roads : Turns the Roads On or Off.
Points Of Interest : Turns the Points of Information On or Off.
ROAD
1
1
2
POINT OF INTEREST (LIBRARY)
2
WAAS 3D
WAAS 3D
Figure 12.0.9 - Example of Roads and Points Of Interest
12.0.10 Chart Settings
Settings that control how the chart features will be shown on the Chart page of the GPS
Chart Plotter.
Lat/Lon Grid : Turns the Latitude and Longitude grid lines on or off on the chart page. See the figure below:
Lat/Lon Grid ON
Lat/Lon Grid OFF
Chart Boundaries : Turns the Chart Boundaries On, Off or Auto. The Chart Boundaries are the “ticked” boxes
sourround the coastline. Each box indicates an area where more detail is available. The Chart
Boundaries are only show when a C-MAP BY JEPPESEN NT
+
or MAX CARD is inserted into the GPS
Chart Plotter. See the pictures below: