Operation Manual

CP390i and CPF390i Page 71

WAAS 3D

Figure 7.1.1 - Moving Mark or Waypoint (1)

4. Press [ENT] ([CLR] to abort the move), the Waypoint appears in the new position.

WAAS 3D

Figure 7.1.1a - Moving Mark or Waypoint (2)

7.2 MARKS/WAYPOINTS LIST

The MARKS/WPTS List shows all the Marks and Waypoints that have been stored into the

GPS Chart Plotter. This page also allows you to:

ICON Allows sorting by icon type. Selections are:

a. SELECT - Only User Points with the selected icon are shown

b. ALL - All User Points are shown

FIND Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob

LOCATE Shows the position of a Mark or Waypoint on the Chart page

EDIT Allows you to edit a previous stored Mark or Waypoint

SORT Allows sorting the name of User Points. Selections are:

a. A-Z ASCENDING - Sorts the name of the Mark or Waypoint in ascending order

b. Z-A DESCENDING - Sorts the name of the Mark or Waypoint in descending order

NEW MARK Allows you to create and edit a new Mark. Useful when entering many Marks from a list.

MODE This selection controls how the Marks or Waypoints are shown on the Chart page. Selections are:

a. SHOW - icon and name are shown

b. ICON - only icon (no name) is shown

c. HIDE - Mark or Waypoint is hidden

d. SHOW ALL - All Marks or Waypoints are shown

e. ICON ALL - All Icons are shown without name

f. HIDE ALL - All Marks or Waypoints are hidden

DELETE Allows to delete the selected point.

DEL ALL Allows to delete all stored points.

SEND* Sends the stored points to a external device (PC) capable of listening to NMEA WPL and RTE

sentences.

RECEIVE* When selected, receives points from an external device (PC) that is capable of sending NMEA

WPL sentence.

NOTE*

The SEND and RECEIVE functions are used to receive or transmit User Points (Marks and

Waypoints) to and from a Personal Computer (see also Par. 2.9).