Operation Manual

Page 48 CP390i and CPF390i
3. A popup window will be shown with a list of nearest Wrecks.
4. Move the ShuttlePoint knob to highlight the desired Wreck and press [ENT].
5. Another window will be shown detailing the Wreck information.
6. Press [CLR] to show the actual position of the Wreck on the Chart Page.
7. Press [CLR] again at any time to return your cursor to your vessel’s position.
WAAS 3D
Figure 4.0.3a - Find Wrecks
4.0.4 Obstructions
This feature is used to locate the 10 nearest Obstructions to the position of your vessel.
An Obstruction is represented with an icon on the chart, see the following table:
snag/stump
wellhead
diffuser
crib
fish haven
foul ground
ice boom
ground tackle
foul area
ICON DESCRIPTION
#
Foul
Obstn
4
6
#
#
Obstn
Wk
Mast (1 )
-
2
Figure 4.0.4 - Obstruction icons Table
1. Press [FIND].
2. Move the ShuttlePoint knob to highlight
OBSTRUCTIONS and press [ENT] or move the
ShuttlePoint knob to the right.
3. A popup window will be shown with a list of nearest Obstructions.
4. Move the ShuttlePoint knob to highlight the desired Obstruction and press [ENT].
5. Another window will be shown detailing the Obstruction information.
6. Press [CLR] to show the actual position of the Obstruction on the Chart page.
7. Press [CLR] again at any time to return your cursor to your vessel’s position.