Operation Manual

CP390i and CPF390i Page 47
7. Press [CLR] again at any time to return your cursor to your vessel’s position.
WAAS 3D
Figure 4.0.2 - Tide Stations
1
3
2
Figure 4.0.2a - Tide Graph page
Refer to the image above. The time (3) displayed corresponds to the location of the cross-
hair cursor (2) in the Tide Graph (1). Moving the ShuttlePoint knob to the left or right changes
the time, and moving the ShuttlePoint knob up or down selects the Tide height and Tide
draught on the Tide Graph.
NOTE
The Local Offset matchs the Time Offset entered in the Time Setup menu (see Par. 3.2)
4.0.3 Wrecks
This feature is used to locate the 10 nearest Wrecks to the position of your vessel. A
Wreck is represented with an icon on the chart. See the following table:
non-dangerous wreck
dangerous wreck
distributed remains of wreck
wreck showing mast/masts
wreck showing any portion of hull or superstructure
ICON DESCRIPTION
Masts
#
Foul
Figure 4.0.3 - Wreck icons Table
1. Press [FIND].
2. Move the ShuttlePoint knob to highlight
WRECKS and press [ENT] or move the
ShuttlePoint knob to the right.