Operation Manual

CP390i and CPF390i Page 153
20.4 OPTIONAL WAAS GPS RECEIVER SPECIFICATIONS
This optional WAAS GPS Receiver is based on a ultimate GPS engine that delivers
accuracy better than three meters by decoding the GPS correction signals from the satellite-
based WAAS (Wide Area Augmentation System). The GPS engine, interface electronics
and the passive antenna are enclosed inside the water-proof plastic housing. This provides
advanced state of the art GPS performance in an easy to use package.
Physical Characteristics
Color Ivory white
Dimensions 97mm in diameter x 32mm in height (flush mounted) or 61,5mm on flag-pole mount
Weight (without cable) 0,35 lb (160 g)
Cable white 15 meter 8x28AWG cable with 6 pins female connector
Electrical Characteristics
Input Voltage 10 Vdc to 35 Vdc unregulated
Input Current 0.8 Wmax
GPS Receiver Sensitivity Tracking, Navigation :-160 dBm
Acquisition, Reacquisition :-160 dBm
Cold Starts :-145 dBm
GPS Performance
GNSS Systems GPS : L1 C/A
GALILEO : L1
SBAS : WAAS (North America), EGNOS (Europe), MSAS (Asia),
GAGAN (Indian)
Geodetic Datum WGS84
Channels 32 + 18
Acquisition Time
Reacquisition < 1 second
Hot Start 1 second outdoor, 10 seconds indoor
Warm Start 29 seconds
Cold Start 29 seconds
Accuracy
GPS < 2.5m
with SBAS < 2.0m
NMEA Output
Messages GGA, RMC, GSA, GSV, TXT