Operation Manual

Page 122 CP390i and CPF390i
Area of coverage of
downloaded data is
located by default with
its center on the
cursor position
Indicates the LAT/LON
position of the cursor
Cursor is locked to the
gray area.
Moving the cursor also
moves the gray area
allowing locating it
over the area where
the user wants to
download the forecast.
Figure 15.0.0 - Example of Download Area
Press [LOAD] to activate the C-Weather Download: the whole data package (see the
previous "Weather data package" table) are downloaded. [S
TOP] allows to interrupt the data
download. At the end of the operation press [E
XIT] to close the window.
15.0.1 Copy From User C-CARD
Allows the whole data package C-Weather loading from the User C-CARD.
15.0.2 Weather Forecast
Allows selecting the Layer of specific weather data to be displayed on the screen and to
change date and time of the forecast preview. The following functions are available:
· Panning: default usage of the cursor key is the normal panning function.
· Zoom in/out: zoom in/out functions are allowed as usual by using [ZOOM IN]/[ZOOM
OUT].
· Set of date and time: [D
ATE] to modify date and time values.
· Layer selection: [LAYER] to cycle of the weather layers.
· Exit: [EXIT] to close the weather prediction page.
15.0.3 Real Time View
The following selections are available:
· Real Time View On: the data is shown (the area of the download) at the current date
and time (received from the GPS).
· Real Time View Off: the Weather data is not displayed.
The layer displayed is the one selected into the previous menu item.
15.0.4 Type of Data
Allows selecting the type of data, refer to the table in the Figure 15.