Operation Manual

Page 112 CP390i and CPF390i
APB Off Off On Off Off
HDG Off Off Off Off Off
BOD Off Off On Off Off
XTE On On On On On
RMA Off Off Off Off Off
RMB Off Off Off Off Off
RMC On On On On On
GGA On On On On On
HSC Off Off Off Off Off
DBT On Off Off Off Off
DPT On Off Off Off Off
MTW On Off Off Off Off
VHW On Off Off Off Off
GSA On Off Off Off Off
GSV On Off Off Off Off
CPF390i
Sentence Port1 Port2 Port3
GLL On On On
VTG Off Off Off
BWC Off Off Off
WCV Off Off Off
APA Off Off Off
APB Off Off Off
HDG Off Off Off
BOD Off Off Off
XTE On On On
RMA Off Off Off
RMB Off Off Off
RMC On On On
GGA On On On
HSC Off Off Off
DBT On Off Off
DPT On Off Off
MTW On Off Off
VHW On Off Off
GSA On Off Off
GSV On Off Off
13.1 NAVIGATE
The Navigate Menu allows customization of the Coordinate System (Loran TD's), Chart
Datum, Chart Orientation Resolution (angle the vessel has to change before the chart is
redrawn) and Static Navigation. See the following table
Coordinate System : Selections are:
a. TD: Time Difference, based on Loran (see the following Par. 13.1.0)
b. UTM: Universal Transverse Mercator Grid
c. ddd mm.mmm:Degrees Minutes and Thousands of Minutes
d. ddd mm.mm: Degrees Minutes and Hundredths of Minutes
e. ddd mm.ss: Degrees Minutes and Seconds (default)
Chart Datum : Allows selection of Chart Datums. The default Datum is WGS84 as C-MAP B
Y JEPPESEN
cartography has been compiled using the WGS84 Datum. A datum is a mathematical