User's Manual

A Division of:
Head Office: SYDNEY- Locked Bag 2086, North Ryde N.S.W. 1670, Australia. Tel: [phone], Fax: [phone].
MELbOURNE ADELAIDE PERTH bRISbANE SYDNEY AUCkLAND
7 Mircro Circuit 14 Phillips St. Unit 1 Unit 1 Unit B 2/24 Bishop Dunn Place,
Dandenong South Thebarton 10-12 Harvard Way 89-101 Factory Rd. 22-24 College St. East Tamaki.
Vic. 3175 S.A. 5031 Canning Vale Oxley Gladesville Manukau
Tel: [phone] Tel: [phone] W.A. 6155 Qld. 4075 N.S.W. 2111 N.Z. 2013
Fax: [phone] Fax:[phone] Tel: [phone] Tel: [phone] Tel: [phone] Tel: [phone]
Fax: [phone] Fax:[phone] Fax: [phone] Fax: [phone]
For customers outside Australia and New Zealand, please contact your local GME retailer or email to: [e-mail]
Part Number: 310351 Drawing Number: 4 39 0 1 - 3
www.gme.net.au
NATIONAL DISTRIbUTOR DETAILS:
3. Identify the plug locking lever, work the screwdriver
blade behind it and move the lever towards the plug
body. At the same time gently pull the plug from the
socket. (see diagram below).
If required, replacement microphones are available with
plug and rubber boot already fitted.
WATER PROOFING CONNECTIONS
Although the RM600D itself is designed to resist the
ingress of water, the cable connectors are not completely
waterproof. After installation, the speaker and remote
connectors should be wrapped in waterproof tape or similar
to minimise the risk of corrosion or water damage. Do
not use normal electrical tape as this will not provide an
adequate seal against water. The connectors should then be
positioned where they are not directly exposed to
the elements.
GME limit this warranty to the original purchaser of
the equipment.
GME warrant the RM600D to be free from defects in
material and workmanship for a period of twelve (12)
months from the date of purchase from their
authorised retailer.
Should the product require servicing during this period,
all labour and parts used to effect repairs will be supplied
free of charge. GME reserve the right to determine whether
damage has been occasioned by accident, misuse or
improper installation whereby the warranty would be void,
including equipment which has been damaged due to:
(a) Incorrect or reverse polarity connection to a battery or
power supply or to an incorrect supply voltage.
(b) Operation of the main unit GX600 without an
antenna or by connection to an antenna which has
been incorrectly installed, resulting in damage to
the radio’s output circuit.
(c) Non-factory modifications.
Procedure to be followed by Claimant: In the event of a
defect occurring during the warranty period, the original
purchaser may return the defective unit along with suitable
proof of purchase date (i.e. receipt, docket, credit card slip
etc.) and a full description of the defect to the retailer from
whom the unit was purchased. All freight charges incurred
for transportation by the retailer or GME are the
purchaser’s responsibility.
GME AFTER SALES SERVICE
Your GME radio is especially designed for the environment
encountered in marine installations. The use of all solid
state circuitry, careful design and rigorous testing, result in
high reliability. Should failure occur however, GME maintain
a fully equipped service facility and spare parts stock to
meet the customer’s requirements long after expiry of the
warranty period.
WARRANTY
Cable
Screwdriver
Locking Lever
move to left to
release Plug
Cable entry hole