User Manual

3
warehouses, laboratories, banks and prisons.
4. Features
 Waterproof, conforms to IP68
 Strong Zinc Alloy Electroplated anti-vandal case
 Full programming from the keypad
 2000 uses, supports Card, PIN, Card + PIN
 Can be used as a stand alone keypad
 Backlight keys
 Wiegand 26 input for connection to external reader
 Wiegand 26 output for connection to a controller
 Adjustable Door Output time, Alarm time, Door Open time
 Very low power consumption (30mA)
 Fast operating speed, <20ms with 2000 users
 Lock output current short circuit protection
 Easy to install and program
 Built in light dependent resistor (LDR) for anti tamper
 Built in buzzer
 Red, Yellow and Green LEDS display the working status
5. Specifications
Operating Voltage
DC 12V
±10%
User Capacity 2000
Card Reading Distance 3-6 cm
Active Current ＜60mA
Idle Current 25±5 mA
Lock Output Load Max 3A
Alarm Output Load Max 20A
Operating Temperature -45℃～60℃
Operating Humidity 10%- 90% RH
Waterproof Conforms to IP68
Adjustable Door Relay time 0 -99 seconds
Adjustable Alarm Time 0- 3 minutes
Wiegand Interface Wiegand 26 bit
Wiring Connections Electric Lock, Exit Button, External Alarm,External reader
6. Installation
 Remove the back cover from the keypad using the supplied special screw driver
 Drill 2 holes on the wall for the Self tapping screws and I hole for the cable
 Put the supplied rubber bungs to into the two holes