Instructions / Assembly

ASSEMBLY INSTRUCTIONS
STEP 3
Insert the FOAM TUBE(9) through the FOAM PAD(30), then attach the assembly onto the U brackets
of the LEFT and RIGHT BACK SUPPORTS(6, 7) with HEX BOLTS(M10x1.5x75mm)(35) and
WASHERS(M10)(42). SECURELY TIGHTEN ALL OF THE BOLTS FROM STEP 1 TO STEP 3.
STEP 4
Attach the LEFT OUTER HANDLEBAR(10) and LEFT INNER HANDLEBAR(12) to the LEFT
UPRIGHT(4) with HEX BOLT(M10x1.5x75mm)(35), HEX BOLT(M10x1.5x70mm)(36), HEX
BOLT(M10x1.5x25mm)(37), WASHERS(M10)(42), and NYLOCK NUT(M10x1.5)(47). Repeat on other
side.
9
9
30
5
4
7
6
10
12
35
36
35
35
37
42
42
42
42
47
11
35
42
47
13
36
37
42