Instructions / Assembly

Assembly Instructions

STEP 2: Insert the INNER BAR(2) into the OUTER BAR(1) and secure with

BUTTON HEAD BOLT(M6x1x15mm)(15).

STEP 3: Refer to the illustration below. Insert the HANDLEBARS(4)

into the ARCHED SUPPORTS(3) and secure with CARRIAGE

BOLTS(M6x1x33mm)(12), LOCK WASHERS(M6)(16), and ACORN

NUTS(M6x1)(17).

STEP 4: Bolt the ARCHED SUPPORTS(3), HANDLEBARS(4), OUTER

BAR(1), and INNER BAR(2) together with CARRIAGE BOLTS

(M6x1x58mm)(13), LOCK WASHERS(M6)(16), and ACORN NUTS

(M6x1)(17). Tighten all bolts from STEP 1 to STEP 4.

NOTE:

Do not tighten any bolts until STEP 4.

STEP 1

Attach the ARCHED SUPPORTS(3)

to the PLASTIC BAR(5) with

CARRIAGE BOLTS(M6x1x45mm)

(14), LOCK WASHERS(M6)(16), and

ACORN NUTS(M6x1)(17).