Owner's Manual ! WARNING Exercise can present a health risk. Consult a physician before beginning any exercise program with this equipment. If you feel faint or dizzy, immediately discontinue use of this equipment. Serious bodily injury can occur if this equipment is not assembled and used correctly. Serious bodily injury can also occur if all instructions are not followed. Keep others and pets away from equipment when in use. Always make sure all bolts and nuts are securely tightened prior to each use.
TABLE OF CONTENTS Safety Instructions ...................................... 2 Before You Begin ........................................ 4 Equipment Warning, Caution & Notice Labels ... 5 Hardware Identification Chart .................... 6 Assembly Instructions ................................ 7 Operational Instructions ........................... 11 Storage ....................................................... 13 Maintenance ............................................... 13 Conditioning Guidelines ...
NEED HELP? CONTACT US FIRST 1 (800) 375-7520 customer.care@staminaproducts.com Hi! From all of us here at Stamina Products, thank you for your purchase. We know that you have big fitness goals in mind and we are here to help you along. Call us, email us, or send us a message on Facebook. Be sure to contact us if you have any questions on your new product.
BEFORE YOU BEGIN Thank you for choosing the Stamina® 1110 Magnetic Rowing Machine. We take great pride in producing this quality product and hope it will provide many hours of quality exercise to make you feel better, look better, and enjoy life to its fullest. It's a proven fact that a regular exercise program can improve your physical and mental health. Too often, our busy lifestyles limit our time and opportunity to exercise.
EQUIPMENT WARNING, CAUTION & NOTICE LABELS This chart is provided to help identify the warning, caution, and notice labels on the Stamina® 1110 Magnetic Rowing Machine. Please take a moment to familiarize yourself with all of the warning, caution, and notice labels. Label is larger than actual size C1 ! CAUTION LABEL(97) CAUTION For consumer use only. Failure to follow all warnings and instructions could result in injury or property damage.
HARDWARE IDENTIFICATION CHART This chart is provided to help identify the fasteners used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws. 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 0 0 1/2 10 1 20 1/2 30 40 2 50 1/2 60 3 70 1/2 80 90 4 1/2 100 110 120 5 1/2 130 140 150 MILLIMETERS 6 8 10 6 in. mm.
ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part, please go to staminaproducts.com under the Customer Care section and order the part needed, e-mail us at customer.care@staminaproducts.
ASSEMBLY INSTRUCTIONS STEP 3 Refer to the illustration below. Unfold the RAIL(48), and then attach to the BASE FRAME(3) with BUTTON HEAD BOLTS(M8x1.25x20mm)(85) and WASHERS(M8)(62). STEP 4 Slide the FRONT COVER(28) onto the LEFT and RIGHT COVERS(17, 18), then attach to the BASE FRAME(3) with ROUND HEAD SCREW(M4.2 x 45mm)(81). STEP 5 Attach the SEAT(21) to the SEAT CARRIAGE(10) with ROUND HEAD BOLTS(M6x1x15mm)(63) and WASHERS(M6)(64).
ASSEMBLY INSTRUCTIONS STEP 6 Refer to detail view C. Insert the HANDLEBAR(15) through the HANDLEBAR SLEEVE(100). Slide the FOAM GRIP(22) onto the protruding end of the HANDLEBAR(15). Press the ROUND PLUG(23) into the end of the HANDLEBAR(15). NOTE: Lubricate the HANDLEBAR(15) with a small amount of liquid soap or water for easier installation of the FOAM GRIP(22). STEP 7 To help install the BOTTLE HOLDER(27), loosen the SCREW(M4.2x16mm)(67) on the RIGHT COVER(18).
ASSEMBLY INSTRUCTIONS STEP 8 Insert the PEDAL SHAFT(6) through the tube located on the MAIN FRAME(1). Slide a PEDAL CAP(19) onto each end of the PEDAL SHAFT(6). Then secure the PEDAL CAPS(19) with BUTTON HEAD BOLTS(M8x1.25x15mm)(60) and LARGE WASHERS(M8)(83) at both ends of the PEDAL SHAFT(6). You need to use two Allen Wrenches to tighten the BUTTON HEAD BOLTS(M8x1.25x15mm)(60) at both ends of the PEDAL SHAFT(6) at the same time.
OPERATIONAL INSTRUCTIONS USING THE FITNESS METER POWER ON: Handlebar movement or press any button. POWER OFF: Automatically shuts off after 4 minutes of inactivity. St. Time FUNCTION BUTTONS : MODE : In the setting mode, press and release to select each function for preset target values for STROKES, TIME, DISTANCE, and CALORIES. Distance Calories St.
OPERATIONAL INSTRUCTIONS AAA Batteries HOW TO INSTALL AND REPLACE BATTERIES: 1. Open the Battery Door on the back of the meter. 2. The meter operates with two AAA batteries, the batteries are not included. Refer to the illustration to install or replace the batteries. NOTE: 1. Do not mix a new battery with an old battery. 2. Use the same type of battery. Do not mix an alkaline battery with another type of battery. 3. Rechargeable batteries are not recommended. 4.
STORAGE 1. To store the Stamina® 1110 Magnetic Rowing Machine, simply keep it in a clean dry place. 2. Move the Stamina® 1110 Magnetic Rowing Machine with the moving wheels on the Front Stabilizer of the BASE FRAME(3). Lift the REAR STAND(2) to move the Stamina® 1110 Magnetic Rowing Machine. Do not use the SEAT(21) to move the Stamina® 1110 Magnetic Rowing Machine. The SEAT(21) will move and the SEAT CARRIAGE(10) may pinch your hand or fingers. 3.
CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive for several years or are severely overweight, start slowly and increase your workout time gradually. Increase your workout intensity gradually by monitoring your heart rate while you exercise. Remember to follow these essentials: Have your doctor review your training and diet programs. Begin your training program slowly with realistic goals that have been set by you and your physician.
WARM-UP and COOL-DOWN Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump rope, and running in place.
PRODUCT PARTS DRAWING 80 78 35 FRONT 50 23 79 22 84 33 36 66 15 73 45 23 16 60 87 60 62 96 80 62 55 53 46 97 79 62 86 89 62 42 67 83 38 65 38 29 85 3 67 62 66 66 66 62 31 54 26 2 BACK 30 14 61 16 11 60 54 62 91 8 60 67 85 52 85 94 58 7 62 16 57 95 62 61 67 56 91 61 60 18 62 85 94 30 79 81 31 31 31 86 67 29 38 85 9 92 89 67 56 27 48 62 71 67 42 28 20 62 61 43 41 60 63 62 39 39 84 82 64 61 44 67 98 65
PARTS LIST PART# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 PART NAME QTY Main Frame Rear Stand Base Frame Foot Bracket Tension Knob Bracket Pedal Shaft Rear Spring Hook Spring Hook Rail Cap Seat Carriage Connection Bracket Magnetic Brake Spacer (ø12.8 x 38.5mm) Shaft Rod (ø12.8 x 58.5mm) Handlebar Screw, Round Head Self-Drill (M4.
PARTS LIST PART# ˙ 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 PART NAME QTY V-Ribbed Belt Idler Roller Idler Wheel Bolt, Button Head (M8 x 1.25 x 20mm) Bearing (608zz) Round Plug (ø19mm) Foot Pad Return Spring Allen Wrench (5mm) Bolt, Button Head (M8 x 1.25 x 15mm) Lock Washer (M8) Washer (M8) Bolt, Round Head (M6 x 1 x 15mm) Washer (M6) Bolt, Flat Button Head (M8 x 1.
LIMITED WARRANTY MODEL 35-1110A WARRANTY Stamina Products, Inc. (“Stamina”) warrants to the original purchaser that this product will be free from defects in materials and workmanship that arise under normal use, service, proper assembly and proper operation in accordance with product warnings/instructions for a period of 90 days on the parts and three years on the frame from the date of the original purchase from an authorized retailer.
NOTES 20
NOTES 21
TO CONTACT CUSTOMER CARE For your convenience, Stamina’s customer care representatives can be reached by email at customer.care@staminaproducts. com or by phone at 1-800-375-7520 (in the U.S.). Our customer care representatives are available Monday through Thursday from 7:30 a.m. until 5:00 p.m., and Friday 8:00 a.m. until 3 p.m. Central Time. ONLINE CUSTOMER CARE customer.care@staminaproducts.com www.staminaproducts.com TELEPHONE CUSTOMER CARE Tel: 1 (800) 375-7520 MAIL STAMINA PRODUCTS, INC.
