User Manual

15
1. To store the inLine® Traction Control System, simply keep it in a clean dry place.
2. Two people are required to move the inLin Traction Control System. One person is required
to lift the back end of the MAIN FRAME(14) and another person is required to lift the FRONT
STABILIZER(2).
STORAGE
The safety and integrity designed into the inLine® Traction Control System can only be maintained
when the inLine® Traction Control System is regularly examined for damage and wear. Special
attention should be given to the following:
1. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
2. Verify that the CAUTION LABEL(38) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(38) if it is missing or damaged.
3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4. Worn or damaged components shall be replaced immediately or the inLine® Traction Control
System removed from service until repair is made.
5. Only Stamina Products supplied components shall be used to maintain/repair the inLine® Traction
Control System.
6. Keep your inLine® Traction Control System clean by wiping it off with an absorbent cloth after use.
MAINTENANCE