Product Manual

ASSEMBLY INSTRUCTIONS
9
STEP 7
Refer to the Bottom View. Push the BUTTON PIN(4) in and insert the ARMPIT PAD SUPPORT(42) into
the SWING ARM(41). Slide an ARMPIT PAD(46) on the ARMPIT PAD SUPPORT(42). Repeat on other
side.
NOTE: There are three adjustment holes in the bottom of the SWING ARM(41) which allow the ARMPIT
PAD SUPPORTS(42) to be attached in three di󰀨erent positions. Start with the center position
and adjust if necessary.
Button Pin(4)
Bottom View