Product Manual

ASSEMBLY INSTRUCTIONS

STEP 4

Refer to the Bottom View. Lock the CERVICAL TRACTION EXTENDING TUBE(39) to the MAIN FRAME(22)

by inserting the pin of the SPRING PIN KNOB(28) into one of the adjustment holes in the CERVICAL

TRACTION EXTENDING TUBE(39) and tightening the SPRING PIN KNOB(28).

NOTE: There are four adjustment holes in the CERVICAL TRACTION EXTENDING TUBE(39) which allow

the CERVICAL TRACTION EXTENDING TUBE(39) to be attached in four di󰀨erent positions. Start

with the center position and adjust if necessary.

STEP 5

Attach the UPRIGHT SUPPORT(18) to the CERVICAL TRACTION EXTENDING TUBE(39) with

BUTTON HEAD BOLTS(M8x1.25x42mm)(9) and NYLOCK NUTS(M8x1.25)(35).

STEP 6

Adjust the position of the HEAD HALTER(40) as shown in detail view B. Attach the HEAD HALTER(40)

to the BUNGEE CORD(51) with the LINKS(48).

Bottom View

Longer

Shorter