Product Manual

ASSEMBLY INSTRUCTIONS
7
STEP 1: Insert the HEIGHT ADJUSTMENT BEAM(10) into the EXTENDING TUBE(12). Lock the HEIGHT
ADJUSTMENT BEAM(10) in position by inserting the pin of the ADJUSTMENT KNOB(11) into one of the
adjustment holes in the HEIGHT ADJUSTMENT BEAM(10) and tightening the ADJUSTMENT KNOB(11).
STEP 2: Insert the PAD TUBE(7) through the hole in the HEIGHT ADJUSTMENT BEAM(10) and secure with
BUTTON HEAD BOLT(M8x1.25x22mm)(6). Slide the FOAM PADS(2) on both ends of the PAD TUBE(7).
STEP 3: Refer to detail view A, push in the BUTTON PIN(4) and insert the ADJUSTABLE INSTEP
FRAME(3) into the HEIGHT ADJUSTMENT BEAM(10). Slide the FOAM PADS(2) on both ends of the
ADJUSTABLE INSTEP FRAME(3).
NOTE: There are four adjustment holes in the HEIGHT ADJUSTMENT BEAM(10) which allow the
ADJUSTABLE INSTEP FRAME(3) to be attached in four di󰀨erent positions. Find the position which
is most comfortable for holding your ankles while performing the back stretching exercise.
Button Pin(4)
A.
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at [e-mail], or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Sta󰀨 is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are t tested at the factory to ensure proper t and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.