User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Main menu
- 7.3 Menu overview
- 7.4 Functions in 2-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 5-channel DMX mode
- 7.7 Functions in 7-channel DMX mode
- 7.8 Functions in 18-channel DMX mode
- 7.9 Functions in 27-channel DMX mode
- 7.10 Functions in 54-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
A sound controlled automatic show can only be activated when the unit is operating in stand
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press [Mode] until the display shows ‘SUxx’ . This activates a sound controlled automatic show.
Now you can adjust the sensitivity of the built-in microphone for sound control. Use [Up] and
[Down] to select a value between 0 (low sensitivity) and 31 (high sensitivity), the display shows
‘SU00’ … ‘SU31’ .
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [Mode].
Sound control and microphone
sensitivity
Operating
Show Bar TriLED 18x3W RGB, Show Bar TriLED 18x3W RGB WH
25
LED Floodlight