User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Main menu
- 7.3 Menu overview
- 7.4 Functions in 2-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 5-channel DMX mode
- 7.7 Functions in 7-channel DMX mode
- 7.8 Functions in 18-channel DMX mode
- 7.9 Functions in 27-channel DMX mode
- 7.10 Functions in 54-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
This setting is only relevant when the device is controlled via DMX.
Press [Mode] repeatedly until the display shows ‘dxxx’ .
Now you can set the number of the rst DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value between 1 and 512 (display shows ‘d001’ … ‘d512’ ).
Make sure that this number matches the conguration of your DMX controller. The following
table shows the highest possible rst DMX address for the various DMX modes.
Mode Highest possible DMX address
2-channel 511
3-channel 510
5-channel 508
7-channel 506
18-channel 495
27-channel 486
54-channel 459
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [Mode].
DMX address
Operating
Show Bar TriLED 18x3W RGB, Show Bar TriLED 18x3W RGB WH
23
LED Floodlight