User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and operating elements
- 7 Operating
- 7.1 Starting the device
- 7.2 Main menu
- 7.3 Menu overview
- 7.4 Functions in 2-channel DMX mode
- 7.5 Functions in 3-channel DMX mode
- 7.6 Functions in 5-channel DMX mode
- 7.7 Functions in 7-channel DMX mode
- 7.8 Functions in 18-channel DMX mode
- 7.9 Functions in 27-channel DMX mode
- 7.10 Functions in 54-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use. The display shows the
operating mode that was selected when the unit was last powered o.
7.2 Main menu
Press [Mode] to activate the main menu and select an operating mode. Use [Up] and [Down] to
change the respectively displayed value. When the display shows the desired value, press
[MODE].
If you don't press any button for about 30 seconds, the current setting will be automatically
applied and the display turns o. The set values are retained as long as the device is connected
to the mains power supply.
Operating
20
Show Bar TriLED 18x3W RGB, Show Bar TriLED 18x3W RGB WH
LED Floodlight