User manual

Table Of Contents

In this menu, you have the option to set the strobe frequency. This setting is only relevant if

the device is not controlled via a DMX controller.

1. Use [UP] or [DOWN] to select the menu option ‘STRO’ and conrm with [ENTER].

2. Use [UP] or [DOWN] to specify the ash frequency for the Strobe eect in a range from

‘ST00’ … ‘ST99’ (fast … slow) and conrm with [ENTER].

In this menu, you have the option to adjust the dimmer settings for the colour red. This setting

is only relevant if the device is not controlled via a DMX controller.

1. Use [UP] or [DOWN] to select the menu option ‘RDIM’ and conrm with [ENTER].

2. Use [UP] or [DOWN] to specify the intensity of the colour red in a range from

‘r000’ … ‘r255’ (o, dark … bright) and conrm with [ENTER].

In this menu, you have the option to adjust the dimmer settings for the colour green. This set‐

ting is only relevant if the device is not controlled via a DMX controller.

1. Use [UP] or [DOWN] to select the menu option ‘GDIM’ and conrm with [ENTER].

2. Use [UP] or [DOWN] to specify the intensity of the colour green in a range from

‘g000’ … ‘g255’ (o, dark … bright) and conrm with [ENTER].

Stroboscope

Preset dimmer red

Preset dimmer green

Operating

RevueLED 120 COB WW DMX

LED Spotlight