User manual

This setting is only relevant if the device is controlled via a DMX controller.
1. Use [UP] or [DOWN] to select the menu option ‘CH-M’ and conrm with [ENTER].
2. Use [UP] or [DOWN] to select the desired DMX mode (display ‘4CH’ , ‘7CH’ ) and conrm
with [ENTER].
In this mode, the device exactly follows the operation of the master that it is connected to.
1. Use [UP] or [DOWN] to select the menu option ‘SLAV’ and conrm with [ENTER].
2. Use [UP] or [DOWN] to enable the desired Slave mode ( ‘SL0’ … ‘SL3’ ) and conrm with
[ENTER].
In this mode, the device projects programmed patterns automatically onto a surface.
1. Use [UP] or [DOWN] to select the menu option ‘AUTO’ and conrm with [ENTER].
2. Use [UP] or [DOWN] to select the speed of the desired automatic programme
( ‘AU00’ … ‘AU99’ ) and conrm with [ENTER].
DMX mode
Operating mode Slave
Operating mode Auto
Operating
RevueLED 120 COB WW DMX
29
LED Spotlight