User manual

7 Operating
Connect the device to the power supply to start operation.
This setting is only relevant if the device is controlled via a DMX controller.
1. Use [UP] or [DOWN] to select the menu option ‘DMX’ and conrm with [ENTER].
2. Use [UP] or [DOWN] to select the desired DMX address between ‘A001’ … ‘A509’ .
Make sure that this number matches the conguration of your DMX controller. The fol‐
lowing table shows the respective highest possible DMX address for the various DMX
modes.
Mode Highest possible DMX address
4-channel mode 509
7-channel mode 506
3. Conrm with [ENTER].
DMX address
Operating
28
RevueLED 120 COB WW DMX
LED Spotlight