User manual

This setting is only relevant if the device is not controlled via a DMX controller.
1. Press [Enter], use [Up] or [Down] to select the menu option ‘Strobe’ and conrm with
[Enter]. Press [Menu] to close the menu without making any changes.
2. Use [Up] and [Down] to specify the ash frequency for the Strobe eect in a range from
‘ST00’ … ‘ST99’ (o, fast … slow) and conrm with [Enter].
This setting is only relevant if the device is not controlled via a DMX controller.
1. Press [Enter], use [Up] or [Down] to select the menu option ‘Dimmer’ and conrm with
[Enter]. Press [Menu] to close the menu without making any changes.
2. Use [Up] and [Down] to specify the brightness of the LED light in a range from
‘r000’ … ‘r255’ (o, dark … bright) and conrm with [Enter].
This setting is only relevant if the device is not controlled via a DMX controller and working as
slave in a master / slave conguration.
1. Press [Enter], use [Up] or [Down] to select the menu option ‘Slave’ and conrm with
[Enter]. Press [Menu] to close the menu without making any changes.
2. Use [Up] and [Down] to enable the desired Slave mode ( ‘SL0’ … ‘SL3’ ) and conrm with
[Enter].
Operating mode ‘Stroboscope’
Operating mode ‘Dimmer’
Operating mode ‘Slave’
Operating
RevueLED 120 COB DMX
27