User manual

Table Of Contents

7 Operating

Connect the device to the power supply to start operation.

This setting is only relevant if the device is controlled via a DMX controller.

1. Press [Enter], use [Up] or [Down] to select the menu option ‘DMX’ and conrm with

[Enter]. Press [Menu] to close the menu without making any changes.

2. Use [Up] and [Down] to assign a DMX address in the range from ‘A001’ … ‘A511’ to the

device (highest possible DMX address in 2-channel operation) and conrm with [Enter].

The following table shows the assignment of the two DMX channels.

Channel Function Value

1 Dimmer function 0% … 100%

2 Strobe eect 0% … 100%

Operating mode ‘DMX’

Operating

LED spotlight