User manual

11 Cleaning
Clean the optical lenses and mirrors which are accessible from the outside periodically to opti‐
mise light output. The frequency of cleaning depends on the operating environment: wet,
smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of
the device.
n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122).
n Always dry the parts carefully.
The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐
ular basis. Before cleaning, switch o the device and disconnect mains-operated devices from
the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit
with a slightly damp lint-free cloth.
Optical lenses and mirrors
Fan grids
Cleaning
maTrixx SC-100 DMX LED Eect
39