User manual

Example: To set the DMX address 10 set DIP switches 2 and 4 to ‘ON’, all others to ‘OFF’. The

highest possible DMX address is 511 (all DIP switches to ‘ON’).

7.2 Operating mode ‘Master / Slave’

Connect the required devices in a chain. The DMX address of the rst device (working as ‘mas‐

ter’) must be set to 001 (rst DIP switch set to ‘ON’, all the others to ‘OFF’). The other devices

(which are set up as ‘slave’), may be set to any DMX address except 1.

DIP switch 10 is used to invert the auto show of the devices connected as ‘slave’. Set DIP switch

10 to ‘ON’ to enable this feature.

Operating

maTrixx SC-100 DMX LED Eect