User manual

The value of the DIP switches 1-9 is binary coded. To set the desired DMX address, set the DIP

switches so that the sum of the resulting numbers yields the desired DMX address. Please

orient yourself by the following table:

SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 DMX address

0 0 0 0 0 0 0 0 1 1

0 0 0 0 0 0 0 1 0 2

0 0 0 0 0 0 1 0 0 4

0 0 0 0 0 1 0 0 0 8

0 0 0 0 1 0 0 0 0 16

0 0 0 1 0 0 0 0 0 32

0 0 1 0 0 0 0 0 0 64

0 1 0 0 0 0 0 0 0 128

1 0 0 0 0 0 0 0 0 256

0: DIP switch is in ‘OFF’ position. 1: DIP switch is in ‘ON’ position.

Setting up the DMX address

Operating

LED scanner