User manual

WARNING!

Risk of epileptic shock

Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.

CAUTION!

Risk of injury due to mirror movements

The mirror mounted at the device head may perform very fast movements (pan, tilt) and reect very bright light. This is also the case

immediately after switching on the device, with automatic or remote operation, and while a connected DMX controller is in o state.

Persons who are in the immediate vicinity of the device may be injured or frightened by this. Make sure that there are no obstacles

within the movement range of the mirror, and that no persons are in the immediate vicinity of the device before switching it on and

during its operation. If any work is to be carried out within the movement range or in the immediate vicinity of the mirror, the device

must remain switched o.

NOTICE!

Risk of re

Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked ames.

Safety instructions

LED scanner