User manual

7. Insert the suction hose of the fog machine back into the fog uid container and let the
device again produce fog for about 20 seconds. This will rinse the lines.
ð
The cleaning is completed.
The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐
ular basis. Before cleaning, switch o the device and disconnect mains-operated devices from
the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit
with a slightly damp lint-free cloth.
Fan grids
Cleaning
M-Fog 1000, M-Fog 1500, M-Fog 2500
35