User manual

7.1 Manual control
Pressing the switch[Manual] and turning the control [Volume] allows you to manually control
the device without timer and DMX connection. The control [Volume] is used to regulate the
amount of fog to be emitted. Please be aware that the manual control is deactivated during
DMX operation! After removing the DMX-connection the fog emission can be manually reacti‐
vated in the device.
7.2 Time-controlled operation
The control panel can be detached from the device and used as a wired remote control (see
operating elements ). For this purpose, loosen the two thumb screws on the control unit.
Turn the control unit o. The green [Output] LED lights up.
Use the [Minutes] and [Seconds] rotary controls to set the interval between two fog blasts and
the duration of each fog blast. Once the timer is active, the green [TIMER] LED ashes.
Adjust the intensity of the fog blast as needed using the [Volume] rotary control.
Operating
M-Fog 1000, M-Fog 1500, M-Fog 2500
25