User manual

An electronic protection circuit switches o the pump when the uid container and hose are
empty.
If the protective circuit is tripped, rell the fog uid and enable the protective circuit either on
the DMX or as follows:
n Turn device o at main switch.
n Turn o the On / O switch of the removable control panel.
n Put all rotary controls in neutral position.
n Turn device on at main switch.
n Turn on the On / O switch of the removable control panel.
n Set rotary controls as desired.
Turn o the power using the main switch. Transport the device only when it is completely
cooled down. To avoid leaking fog uid during transport, you should transport the device only
with empty uid container.
Dry-run protection
Turning the device o
Operating
fog machine
24