User manual

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts
inside. Do not use the device if covers, protectors or optical components are missing or damaged.
DANGER!
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or re. If in doubt, seek advice from a
registered electrician.
WARNING!
Risk of burns from ammable liquids
The use of ammable liquids in this device may cause severe burns and damage to property. Always use approved fog uids. Never
ll ammable liquids into the tank of the device.
WARNING!
Risk of burns
The generated fog at the fog nozzle is hot and can cause burns. Occasionally hot uid drops may escape from the nozzle. The dis‐
tance of persons and objects to the fog nozzle must be at least fty centimetre (1.6 feet). Do not touch the fog nozzle during and
shortly after operation. It becomes very hot and may cause burns even several hours after switching o the device.
Safety instructions
M-Fog 1000, M-Fog 1500, M-Fog 2500
11