User manual

Symptom Remedy
Device not working, no light 1. Check mains connection and fuse.
2. Check the settings for manual operation (‘Static
Color').
No response to the DMX con‐
troller
1. Check whether the DMX cables run near or parallel to
high-voltage cables that may cause damage or interfer‐
ence to the DMX interface circuit.
2. Try using another DMX controller.
If the procedures recommended above do not succeed, please contact our Service Center. You
can nd the contact information at www.thomann.de.
Troubleshooting
LED Flash LF12
29
Stroboscope