User manual

A constant unicoloured pattern can only be activated if the unit is working in stand-alone
mode or as master device in a master / slave combination. This setting is only relevant if the
unit is not controlled via DMX.
Press [Mode] repeatedly until the display shows ‘Colr’ .
Press [Setup]. With [Up] and [Down] to choose from the following options:
Display Description
‘I--r’ Red
‘2-rg’ Red and green
‘3--g’ Green
‘4-gb’ Green and blue
‘5--b’ Blue
‘6-rb’ Red and blue
‘7rgb’ Red, green and blue
‘ OFF’ LEDs o
Constant unicoloured pattern
Operating
LED oodlight
36