User manual

A sound-controlled automatic show can only be activated if the unit is working in stand-alone

mode or as master device in a master / slave combination. This setting is only relevant if the

unit is not controlled via DMX.

Press [Mode] repeatedly until the display shows ‘SUxx’ . This will activate a sound-controlled

automatic show.

Now you can adjust the sensitivity of the built-in microphone for the sound-control. Use [Up]

and [Down] to select a value between 0 (low sensitivity) and 31 (high sensitivity), the display

shows ‘SU00’ … ‘SU31’ .

Wait for about 30 seconds until the display turns dark. Then the settings have been applied.

Press [Mode] to return to the parent menu without any changes.

Sound-control and microphone

sensitivity

Operating

LED Bar 240/8 RGB