User manual

A preprogrammed automatic show can only be activated if the unit is working in stand-alone

mode or as master device in a master / slave combination. This setting is only relevant if the

unit is not controlled via DMX.

Press [Mode] repeatedly until the display shows ‘Prxx’ . Now you can select one of the preprog‐

rammed automatic shows. Use [Up] and [Down] to select a value between ‘Pr01’ and ‘Pr21’ .

For programmes Pr20 and Pr21, you can set a static colour (background colour) for all seg‐

ments, or a colour that lights up segmentally (hopping colour). Press [Setup] repeatedly until

the display shows ‘1xxx’ (background colour) or ‘2xxx’ (hopping colour). With [Up] and [Down]

you can toggle between the following options:

Display Description

‘--r’ Red

‘-rg’ Red and green

‘--g’ Green

‘-gb’ Green and blue

‘--b’ Blue

‘Preprogrammed automatic

show’ mode

Operating

LED oodlight