User manual

7 Operating

7.1 Starting up the device

Connect the unit to the power grid to start the operation. After a few seconds, the display

shows a running reset. The unit is then ready for use.

7.2 Main menu

Press [Mode] to activate the main menu and to select an operating mode. Use [Up] and [Down]

to change the respectively indicated value. When the display shows the desired value, press

[Mode].

If you don't press any button for about 30 seconds, the current setting is being applied and the

display turns dark. The set values are retained as long as the unit is connected to the power

supply.

Operating

LED Bar 240/8 RGB