User manual

A constant unicoloured pattern can only be activated when the unit is operating in stand

alone mode or as master in a master / slave combination. This setting is only relevant if the

device is not controlled via DMX.

Press [Mode] repeatedly until the display shows ‘CoLr’ .

Press [Setup]. Now use [Up] and [Down] to select one of the following options:

Display Description

‘r.000’ … ‘r.255’ Red

‘G.000’ … ‘G.255’ Green

‘b.000’ … ‘b.255’ Blue

Wait about ten seconds until the display turns dark. Then the settings have been applied. To

return to the parent menu without making changes, press [Mode].

Constant unicoloured pattern

Operating

LED Bar 120/4 RGB DMX

LED Floodlight