User manual

A preprogrammed automatic show can only be activated when the unit is operating in stand-

alone mode or as master in a master / slave combination. This setting is only relevant if the

device is not controlled via DMX.

Press [Mode] repeatedly until the display shows ‘Pr.xx’ . Now you can select one of the preprog‐

rammed automatic shows. Use [Up] and [Down] to select a value between ‘Pr.01’ and ‘Pr.20’ .

Settings for programme 01:

For ‘Pr.01’ , you can choose from several colours or blackout. Press [Setup]. Now use [Up] and

[Down] to select one of the colours.

Display Description

‘I.--r’ Red

‘2.-rg’ Red and green

‘3.-rg’ Red and intense green

‘4.--g’ Green

‘5.-gb’ Green and blue

‘6.--b’ Blue

‘7.-rb’ Red and blue

‘8.-rb’ Intense red and blue

Operating mode ‘Preprog‐

rammed automatic show’

Operating

LED Bar 120/4 RGB DMX

LED Floodlight