User manual

7 Operating

7.1 Starting the device

Connect the device to the power supply to start operation. After a few seconds, the display

indicates that a reset is in progress. The device is then ready for use. The display shows the

operating mode that was selected when the unit was last powered o.

7.2 Main menu

Press [Mode] to activate the main menu and select an operating mode. Use [Up] and [Down] to

change the respectively displayed value. When the display shows the desired value, press

[MODE].

If you don't press any button for about ten seconds, the current setting will be automatically

applied and the display turns o. The set values are retained as long as the device is connected

to the mains power supply.

Operating

LED Bar 120/4 RGB DMX

LED Floodlight