User manual

As long as the display is active, the rst digit is used as a DMX indicator.
If the unit is in DMX mode and a DMX controller is connected and turned on, the rst digit of
the display will ash. If the unit is in DMX mode, but without a turned on DMX controller con‐
nected, the rst digit of the display will light constantly.
When you congure a group of devices in master/slave mode, the rst unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the rst slave device. Then connect the DMX output of the rst slave device to
the DMX input of the second slave device and so on.
DMX indicator
Connections in master/slave
mode
Starting up
20
LED Bar 120/4 RGB DMX
LED Floodlight