Data Sheet

Thomann GmbH
Hans-Thomann-Straße 1 • 96138 Burgebrach
Germany • www.thomann.de
DocID: 281184_17.08.15
EN
FFC-1 DMX Foot
Fog Controller
This device is meant to be used as a DMX controller for fog ma-
chines. Use the device only as described here. Any other use or
use under other operating conditions is considered to be improper
and may result in personal injury or property damage. No liability will be as-
sumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are properly disposed of
and are not in the reach of babies and young children. Choking haz-
ard! Ensure that children do not detach any small parts (e.g. knobs or
the like) from the product. They could swallow the pieces and choke! Never let
children use electrical devices unattended.
For the transport and protective packaging, environmentally
friendly materials have been chosen that can be supplied to nor-
mal recycling. Ensure that plastic bags, packaging, etc. are properly
disposed of. Do not just dispose of these materials with your normal
household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dis-
pose of your old device with your normal household waste. Dispose of
this product through an approved waste disposal rm or through your
local waste facility. Comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.
This DMX foot controller with 3-pin DMX output can be used for all DMX fog machines.
The long-awaited solution for musicians, entertainers, DJs, and all others who want to control their
DMX fog machine simply by foot. The FFC-1 has four DMX channels, which can be set directly to
value 0 or 255 via dip switch. In this way the majority of DMX enabled fog machines can be oper-
ated with the FFC-1 foot controller.