User manual

1 [ON/OFF]
Mains switch. Turns the device on and o.
2 [DMX IN]
DMX input in three-pin and ve-pin design
3 [DMX THRU]
Passive DMX output for looping the signal to a connected device, in three-pin and ve-pin design.
4 [DMX OUT]
4 × active DMX outputs to buer, amplify and distribute the signal to other DMX chains, three- and ve-pin type with
control LEDs for the signals on the DMX data lines of the DMX outputs. The red LED indicates the operational readi‐
ness of the DMX outputs. The green LED lights up when a DMX controller is connected and a signal is transmitted on
the data line.
Connections and operating elements
DMX Splitter 4 MKIII 19"
17