User Manual

Scanners DMX channels Fader control LED

4 49-64 On On

5 65-80 On On

6 81-96 On On

7 97-112 On On

8 113-128 On On

9 129-144 On On

10 145-160 On On

11 161-176 On On

12 177-192 On On

Press a scanner button to turn on manual fader control. Press the scanner button again to turn off fader

control. The LED next to the button lights up or goes out to indicate your selection.

2. Scene Buttons Press the scene buttons to load or store your scenes. There are a maxi-

mum of 240 programmable scenes.

3. Faders These faders are used to control the intensity of channel 1-8 or channel

9-16 depending upon the selected page.

4. Page Select Button Used to select page between Page A (1-8) and Page B (9-16).

5. Fog Machine Button Activates Fog Machine .

6. WAIT Time Slider Used to adjust the chase wait time within the range of 0.1 second to 5

minutes.

7. Fade Time Slider Used to adjust the fade time. Fade time is the amount of time it takes for a

scanner(or scanner) to move from one position to another, for the dimmer

to fade in or fade out.

8. LCD Display Shows the current activity or programming state.

9. Pan Wheel This jog wheel is used to control the pan of the scanner or for program-

ming.

10. Tilt Wheel This jog wheel is used to control the Tilt of the scanner or for programming.

11. Program Button Activates Program mode.

12. MIDI/Rec Used to control MIDI operation or to record programs.

13. Auto/Del Activates Auto mode or to delete scenes or chases.

14. Music/Bank Copy Activates Music mode or to copy a bank of scenes

15. Bank Up/Down Press the Up/Down button to select from 30 banks.

16. Tap/Display Used to create a standard beat or to change the value mode between %

and 0-255.

17. Blackout/Stand alone Button Tap to momentarily pause the whole output. Hold on this button to enter

Stand alone mode.

18. Chase Buttons(1-6) These buttons are used for activating the chase of programmed scenes.

19. Fine Button When Fine is on, the Pan or Tilt wheel will control the scanner in the small-

est increment.

20. Mode Button Pressing Fine and Mode buttons allows to activate Assign or Reverse

mode.