User Manual
4
X 8 faders for manual control
X All data can be sent or received between two units
X Auto programs (scenes and chases) under control by Wait Time sliders (or Tap Sync) and Fade Time
sliders
X Fade Time/Assign Fade Time
X The scanners under control by Pan and Tilt jog wheels (Master II)
X Fine adjustment of the Pan and Tilt
X Reverse DMX channels causing the faders to control the output reversely
X Preview assigned or reversed DMX channels
X 8 CH./16 CH. mode for Assigned or Reversed DMX channels
X Blackout master / Stand alone mode
X Manual override
X Built-in microphone for Music triggering
X MIDI control over banks, chases and Blackout
X LCD display
X DMX polarity select
X Power failure memory
X Auto Address
WARNINGS
• DO NOT let any inammable liquids, water or metal objects enter the unit.
• Should any liquid be spilled on the unit, DISCONNECT the power supply to the unit immediately.
• STOP using the unit immediately In the event of serious operation problems and either contact your local
dealer for a check or contact us directly.
• DO NOT open the unit - there are no user serviceable parts inside.
• NEVER try to repair the unit yourself. Repairs by unqualied people could cause damage or faulty opera-
tion. Contact your nearest dealer.
CAUTIONS
• This unit is NOT intended for home use.
• After having removed the packaging check that the unit is NOT damaged in any way. If in doubt, DON‘T use
it and contact an authorized dealer.
• Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be left within children‘s reach, as
it can be dangerous.
• This unit must only be operated by adults. DO NOT allow children to tamper or play with it.
• NEVER use the unit under the following conditions:
In places subject to excessive humidity.
In places subject to vibrations or bumps.
In places with a temperature of over 45 °C/113 °F or less than 2 °C/35.6 °F.
• Protect the unit from excessive dryness or humidity (ideal conditions are between 35% and 80%).
• DO NOT dismantle or modify the unit.