User Manual

4-8 Send File Dump

NOTE

You must set up proper connection before you can send or receive the le

dump.

1. With the power off, press and hold down the Scanner buttons 2, 3 and

Scene button 1 at a time.

2. Apply the power again while pressing these three buttons, the LCD shows “TRANSMIT” indicating this unit

is ready to send the le dump.

3. Press the Scene buttons 7 and 8 at a time to send the le dump.

4-9 Receive File Dump

1. With the power off, press and hold down the Scanner buttons 8, 9 and

Scene button 2 at a time.

2. Apply the power again while pressing these three buttons, the LCD shows

“RECEIVE” indicating this unit is receiving the le dump.

3. When receiving is over, this unit will return to the normal mode.