User Manual

4-4.8 Auto Address

1. Hold on the Black out /Stand alone button for 3 seconds to enter Stand-

Alone mode.

2. Hold down the Scanner 1 button and then press Black out /Stand alone

button. You will see the pan & tilt of all the xtures in the chain stopping at

the central position. The shutter & LED of the rst xture will open/ blink

indicating the xture is active, ready to be designated a new position ( the

number in the chain ).

3. You can use Bank Up / Down to select next xture or last xture.

4. Select Scanner 1~12 button to set DMX address.

5. Hold down the Page button and then press Scanner 1~12 button can make

the address add to 8 .

6. Press the Black out /Stand alone button again to return to the program

mode.

SCANNER No. 1 2 3 4 5 6 7 8 9 10 11 12

DMX channel

For Press

Scanner 1~12

button

1 17 33 49 65 81 97 113 129 145 161 177

DMX channel

For Hold down

the Page button

and the Press

Scanner 1~12

button

9 25 41 57 73 89 105 121 137 153 169 185